Spreader boots in leather - medium (2 pack)

PRODUCT INFORMATION

Material - Leather, neoprene, Velcro hook and loop fastener, UV-protected Color - Grey Package - Sold in pair (starboard and port) Size - For spreaders 95 - 122 mm (3 3/8" - 4 13/16") with continuous rigging or for spreaders 74 - 95 mm (2 7/8" - 3 3/8") with linked rigging Art nr - #1052 Read more - FAQ

 DOWNLOAD FACT SHEET

See more spreader boot sizes Spreader boots are for sail protection against chafe otherwise eventually the sails breaks. One way that many sailmakers do, is to reinforce the sails with an extra layer of sail cloth material or you can also make the spreader tips smooth. To reduce the damage to the sails, you need spreader boots protection to cover the end of the sails with spreader boots in leather or with tape. There are various solutions to protect the spreaders.

Tape

The most common is for sail protection is with with electrical tape or Gaffa tape / silver tape / cloth material tape. It usually breaks down by the UV light in a couple of months. It looks pretty ugly with tape residue hanging from the spreaders. When you take down the spreaders you have sticky tape residue on the spreaders and old residue are hard to get off. There are more different tapes such as the million-dollar tape. UV protected and lasts all season but as the name implies, it is quite expensive.

Plastic

Customized plastic covers. Here you have to know exactly what spreader tips you have and trademark on the mast to find the right plastic cover. Cheap but har to get it right.

Leather

There are two different spreader boots in leather for sail protection. Sew on and Waterline Design Spreader boots. - Leather that is sew on to the spreader. Classic solution that is customized for your spreaders. You cut a piece of leather and pre-punch it and sew them on to the spreader ends. It is quite expensive (take long time) but looks nice and works well. Hard work when you should inspect the spreader. - Spreader boots in leather set up with Velcro from Waterline Design. A universal solution that fits all types of spreaders. Four sizes fit everything in the market. You only need to measure the width of the spreaders to be able to choose the right one. The spreader boot is a cover that has leather on the outside and neoprene on the inside. The spreader cover is folded around the spreader and fastened with a Velcro strap which is rolled around the spreader. On the edge of the leather / neoprene cover is a rubber cord that pulls together the edges. The edge band makes the size of the spreader cover flexible. The neoprene inside makes the leather smoother. According to riggers / sailmakers this is really nice that every spreader should have. Everything is UV protected and we have also sewn on a layer of leather on the Velcro strap to make it a little nicer.