Brasswire
Brasswires for transducers. Ankarlift has an automatic stop function that, via a sensor, reads two different transducers - two brass wires on the anchor line. Until the first transducer, the windlass operates in a high-speed mode. When reaching the second transducer, it switches to a lower "pulse speed". Note that the anchor line has a stopping distance of a few decimetres. By decoupling, the anchor line is easily released again. In order for the auto-stop function to work, two sensors (brass wires) must be mounted on the anchor line, one for the high-speed mode and one for the end position. Make a whip of approx.
10mm using the accompanying brass wire.
Be sure to look over the brass wires every season so it still looks good, are not damaged or have damage surrounding parts.
Brasswires for transducers.
Ankarlift has an automatic stop function that, via a sensor, reads two different transducers - two brass wires on the anchor line. Until the first transducer, the windlass operates in a high-speed mode. When reaching the second transducer, it switches to a lower "pulse speed". Note that the anchor line has a stopping distance of a few decimetres. By decoupling, the anchor line is easily released again. In order for the auto-stop function to work, two sensors (brass wires) must be mounted on the anchor line, one for the high-speed mode and one for the end position. Make a whip of approx.
10mm using the accompanying brass wire.
Be sure to look over the brass wires every season so it still looks good, are not damaged or have damage surrounding parts.
| EAN | 7332640007655 |
|---|---|
| Model name | 1141 |
| Brand | Ankarlift |
